Guide Home Improvement Outdoor

How to Install an Outdoor Pond with outdoor daybed for fun?

An outdoor pond can be a beautiful and peaceful addition to your front or back yard. It can be a wonderful focal point in your landscaping design. A pond can also give you hours of relaxing enjoyment and serenity.

However, to get to that future period of relaxation and enjoyment, you first have to do some planning. Creating an outdoor fish pond requires a design, some physical work on someone’s part, and some minor financial investment.

Think about what you want your pond to look like. What features do you want it to have? Do you want a waterfall? Do you want to have a bench or swing nearby? What plants or flowers do you plan on using to add to the landscaping design? Do you want wicker daybed at outer? Then take a look over the article for better understanding of the benefits of outdoor pond and outdoor daybeds.

Go outside and look around your yard. Is there a corner or section that just seems to be the ideal spot? Perhaps you have a sloping hill or bank that would help create a waterfall. Give the location some careful thought. As I said earlier, there is some physical work involved, mainly digging, so you don’t want to change your mind after you’ve dug the hole.

You will also need electrical service to the pond area if you plan on using a pump and filter. Make sure the wiring is enclosed in conduit to your location and up into the weatherproof box and cover. You should also be using a GFCI receptacle.

Once your location is decided, you can begin actually planning your pond. Are you going to use a preformed pond or create your own design? If you plan on using a preformed pond, the next decision is the size. Keep in mind that the larger the pond, the more digging will be required.

If you don’t like the plastic ponds, you can always create your own size and shape. A water hose is great for lying out different shapes. Once you have the shape and size chosen, the hard part begins. Of course, you can always hire someone to dig the hole for you, or rent a small excavator to do the dirty work.

If you are using the preformed pond, simply dig the hole the depth and shape of the pond. The top rim should be about an inch above the ground. If you are using your own creation, dig the hole the depth you want in the center, but leave a bench around the outer edge about a foot deep. This will create a spot on which to set plants.

Line the bottom of the hole with an inch or two of sand. This will help cushion the bottom and prevent rocks or sticks from puncturing the plastic. Line the hole with thick mil plastic. The plastic should extend eight to twelve inches over the rim. Smooth out wrinkles on the bottom before you start to fill it with water.

If you plan on having a waterfall, make sure you line it with plastic also. That way any water that runs in behind the rocks will make its way back into the pond. Don’t worry about the plastic showing, you can cover it with rocks, river pebbles and even plants.

Fill the pond with water. Do not put any fish in the water for a couple of days. This will allow any chlorine in the water time to disappear. Use large flat rocks to form a border around the rim of the pond. Add plants and shrubs, driftwood, and whatever groundcover you want. You could use mulch, gravel, or sand to border the pond.

You will need a pump and filter to circulate and filter the water. By knowing the approximate amount of water in the pond, you will be able to figure what size pump you need.

Add a bench or even a swing so that you have a place to sit and enjoy your beautiful pond. Pour yourself a tall glass of lemonade or tea, then sit down and reap the rewards of all your hard work.

Liam Rubin is a graduate of Bachelor of Science in Journalism from the University of Cambodia. He is currently the managing editor of T3 Licensing and a freelance writer.